3 inch lift question

Reply Subscribe

Thread Tools

Search this Thread

07-12-2009 | 09:13 PM

squrrlykyle

Thread Starter

Junior Member

Joined: Jul 2009

Posts: 1

3 inch lift question

i have a 2002 chevy silverado 1500hd and it already has 3 inch cst front spindles how do i get a nother three inches of lift in the front? can i buy a 6 inch lift kit with out spindles and keep my 3 inch spindles?

07-23-2009 | 01:59 PM

bigchevy

Member

Joined: May 2009

Posts: 34

From: san diego, ca

try cranking on the torsion keys and see how that works w/ the stock keys. if you dont get 3 in. get aftermarket torsion keys and you should be able to squeeze 3 in out of those. it is a 4x4 right?

07-23-2009 | 05:23 PM

6mins2live

Senior Member

Joined: Jan 2008

Posts: 429

From:

I would say start with the torsion keys if your looking to go the cheap route. Then turn the torsion keys up. You want to be careful not to crank them up too much because it will ruin your ride quality.