4.10 gear need advice!

Reply Subscribe

Thread Tools

Search this Thread

#21

11-29-2007 | 06:28 PM

jester

Thread Starter

Joined: Apr 2007

Posts: 59

From:

RE: 4.10 gear need advice!

Not sure? It looked like all was replaced and upgraded.

#22

11-30-2007 | 05:42 PM

zimsilverado

Joined: Oct 2007

Posts: 40

From:

RE: 4.10 gear need advice!

It could be the Driveshaft. with the 4.10 gears, the shaft is turning way faster than normal. You might be near critical speed, which could cause the vibration.

#23

11-30-2007 | 05:48 PM

jester

Thread Starter

Joined: Apr 2007

Posts: 59

From:

RE: 4.10 gear need advice!

I would like to get my drive shaft balanced, but everyone I talk to says that the drive shaft balancing machine will not spin 90MPH.

#24

12-01-2007 | 07:39 PM

Cracker

Joined: Jul 2007

Posts: 621

From:

RE: 4.10 gear need advice!

If the shaft is out of balance they won't need to spin it that fast to detect the vibration.

#25

12-04-2007 | 01:31 PM

dg63610

Joined: Dec 2007

Posts: 4

RE: 4.10 gear need advice!

check the drive shaft and dont forget about the tires too! a clod of mud or something on the inside of the rim will throw it out of balance just enough