Originally Posted by cotywheeler

personally i'm not much on the big rims. these guys are all right too. if you want bigger tires just to have bigger tires and you don't have enough room in the fender wells, you have to think of how much it's going to increase your front end. if you ahve to level it out 2 inches and your enw tires are 2 inches taller, you jsut raised your front end 4 inches. that's alot. your suspensions is great. Z-71 off road suspension is awesome. at the same time though, sinc eyou don't have the 4 wheel option, you got on-off road tires, a skid plate, fog lamps and rims. you got new rims and tires. basically you would be losing money, is it really all that worth it? i know it pulls just fine. but to spend that much extra money just for some bigger tires, but no 4 wheel drive? i'm not being an *** i promise, just logical. what do you typically pull? bumper pull, fifth wheel> trailers or boats?

Originally Posted by Mr_Shamrock

That is the beauty of using just the spindles. It basically just moves your rim mounting location straight down and doesn't affect the angles of your a-arms so no camber adjustment is needed. I have been lowering trucks with spindles for years. Lowering spindles just do the opposite (obviously) and move the rim mounting location up into the wheel well. You need to check with whichever manufacturer you decide to go with (if you decide to go this route) because you will probably need a minimum of a 17' or maybe even 18" rim. Which if you have your rims already may put an axe in a spindle lift. The cheaper leveling kit just brings new torsion bar keys which is OK too, but I am sure you will need to align everything when done which would still be cheaper than buying new wheels if yours aren't big enough already. Good Luck either way!

Originally Posted by 6mins2live

1) Articulation is how much verticle travel yo have in your axel/wheels. Mainly needed in off road applications. I use my truck off road a lot and honestly I have never been like "damn, I wish I had another 3" of articulation." So because your truck is 2WD I am guessing that doesnt matter to you that much anyway. With stock shocks you will have more than enough for any on road situation you will run into.

2)I dont know much about lift spindles, never delt with them.

3)Body lift and leveling kit are very very different. A body lift literally lifts the whole body up off the frame by repalcing the stock body mounts with ones that are 2-3" taller. In my opinion this looks kind of goofy if it is not suplimented with a suspension lift. Not to mention if you have nerf bars, brush gaurd, CAI, and some other things they will no longer work/look right because the only thing that raises is the body. Some say it is not too hard and some say it is. All depends on your ability and resources. This will help you NONE off road, no extra ground clearence, no extra suspension travel, mostly useless.

4) A front leveling kit consist of a) torsion keys (4x4) which are made different than the stocks to give the extra lift. or b) coil spring spacers (2WD) which literally add a little extra length to the coil springs.

5) A suspension lift is the most expensive way to go but also to most effective. All of the others are only good for 2-3" where as a suspension lift can go from 3" to 9"+. This will be the best way to help off road, giving you the extra ground clearence and suspension travel. If your looking to go this route I suggest a lot of reasearch before you do anthing.

Hope this helps you guys. Questions welcome. Its a big subject.