Chevy Silverado/ GMC Sierra Forum Discuss the Chevrolet Silverado and GMC Sierra here.

sputter box

Thread Tools
 
Search this Thread
 
  #1  
Old 04-05-2007 | 01:02 PM
Regal105's Avatar
Thread Starter
Joined: Apr 2007
Posts: 140
From:
Default sputter box

i got a 305 tbi in a 88 silverado
single cab standard box, 4 speed
700r4, when i start it it will idel perfect
but when you push the gas it sputters
and runs really rough, but if you let it warm up
it gets better and better till it eventually goes
away, does anyone know what this porblem is????
 
  #2  
Old 04-05-2007 | 02:38 PM
BigTexasChevy's Avatar
Joined: Feb 2007
Posts: 164
From: Ozona, TX
Default RE: sputter box

sounds like a sensor problem in your Throttle Body....just a quick piece of advice....just save up and go buy a new throttle body....the rebuild klits for the throttle body are crap, infact the holley throttle body you can get on ebay for a cheaper price, and they work great. my 83 cj-7 has a 350 tbi swap, and it ran like crap after 3 rebuild on the TB, i then went with the Holley TBI and it was GREAT!
 
  #3  
Old 04-05-2007 | 05:47 PM
Regal105's Avatar
Thread Starter
Joined: Apr 2007
Posts: 140
From:
Default RE: sputter box

i have 2 morethrottlebodys off of 4.3 v6's that i have scrapped,
everything is the same except the injectorsdo you think i should swap some stuff, like the throttle position sensor or map sensor
 
  #4  
Old 04-05-2007 | 06:50 PM
Argon's Avatar
Senior Member
Joined: Feb 2007
Posts: 2,167
From:
Default RE: sputter box

Probably moisture in the cap from crud built up in it..................On cold start up they run ignorant,but the engine heat dries em out!
 
  #5  
Old 04-05-2007 | 06:51 PM
Regal105's Avatar
Thread Starter
Joined: Apr 2007
Posts: 140
From:
Default RE: sputter box

i know i bought a new cap and rotor tryed all that, could it be the timing advance sticking for some reason???
 
  #6  
Old 04-05-2007 | 07:00 PM
Regal105's Avatar
Thread Starter
Joined: Apr 2007
Posts: 140
From:
Default RE: sputter box

i also got 8 new plugs, i tryed 8 different plug wires, new air filter
i dont get it ya kno, it idles like brand new but when u stomp the petal
it just misses like crazy, i checked the compressionall arround150psi
on all 8 cylinders
 
  #7  
Old 04-05-2007 | 07:27 PM
Regal105's Avatar
Thread Starter
Joined: Apr 2007
Posts: 140
From:
Default RE: sputter box

it ran fine first when i bought it then all of a sudden it was running ****ty
does anyone kno wats goin on or at least heard of this kinda problem b4?
 
  #8  
Old 04-05-2007 | 07:37 PM
Argon's Avatar
Senior Member
Joined: Feb 2007
Posts: 2,167
From:
Default RE: sputter box

I still say its ignition if it idles fine....

Cheap cap..
cracked plug...

In RARE cases,maybe a bad crank sensor...Any check-engine lite??
 
  #9  
Old 04-05-2007 | 09:00 PM
Regal105's Avatar
Thread Starter
Joined: Apr 2007
Posts: 140
From:
Default RE: sputter box

yeah man after like 2-3 mins the check engine light comes on
 
  #10  
Old 04-05-2007 | 09:04 PM
Regal105's Avatar
Thread Starter
Joined: Apr 2007
Posts: 140
From:
Default RE: sputter box

your right it more than likely is ignition,
but i'm not sure about moisture, tomoro ill
pop off the cap and dry it out with a rag and
some wd-40 and maybe change the ignition
module orw/e it is called under the advance
 


Quick Reply: sputter box



All times are GMT -5. The time now is 01:31 PM.