Chevy Silverado/ GMC Sierra Forum Discuss the Chevrolet Silverado and GMC Sierra here.

Trouble Cold Starting

Thread Tools
 
Search this Thread
 
  #1  
Old 02-08-2008 | 08:40 PM
uscghalle's Avatar
Thread Starter
|
Member
Joined: Oct 2007
Posts: 64
From:
Default Trouble Cold Starting

Can somebody help me figure out why my truck has trouble cold starting? When I give it the first start of the day, it hesitates and takes some throttle pumping to get it going, and then if I let off of the throttle before about 15 seconds, it dies. Battery is good, tight and clean connections, Autozone checked the starter, said it was good. After it gets warmed up, no trouble starting at all. Thanks in advance for your help!
 
  #2  
Old 02-08-2008 | 09:44 PM
TheStreetForce's Avatar
Joined: Dec 2007
Posts: 10
Default RE: Trouble Cold Starting

There are a whole rash of sensors that can go bad but iff your engine is high mileage or has been abused i would go after a compression test first to rule out shot pistons. sometimes known as a leakdown test, this will let you know if it is computerized or a mechanical problem. Once the engine heats up the metals expand and the engine works fine but when cold they are contracted and scrapes and gouges in the cylnder wall can open up enough so the idle is screwed up. Again this most likely is not the issue but a compression test is real cheap to rule out an expensive fix..
 
  #3  
Old 02-08-2008 | 09:48 PM
rxsteven's Avatar
Senior Member
Joined: Jan 2008
Posts: 1,460
From: Wherever my job takes me
Default RE: Trouble Cold Starting

Isnt there some kind of sensor that tells the computer thats its cold im not sure what its called but that might be youre prob. Its supposed to keep youre idle at like 1200 or something till it reaches a certain temp.
 
  #4  
Old 02-08-2008 | 09:49 PM
uscghalle's Avatar
Thread Starter
|
Member
Joined: Oct 2007
Posts: 64
From:
Default RE: Trouble Cold Starting

My idle in park is about 900 RPM, when in gear, it is about 550 RPM
 
  #5  
Old 02-08-2008 | 09:54 PM
rxsteven's Avatar
Senior Member
Joined: Jan 2008
Posts: 1,460
From: Wherever my job takes me
Default RE: Trouble Cold Starting

even when you first start it

 
  #6  
Old 02-08-2008 | 10:05 PM
uscghalle's Avatar
Thread Starter
|
Member
Joined: Oct 2007
Posts: 64
From:
Default RE: Trouble Cold Starting

When first started, it stays somewhat low, although I'm not positive, because I havent payed much attention to it and also, lately have been having to give it throttle to get it going.
 
  #7  
Old 02-08-2008 | 10:23 PM
rxsteven's Avatar
Senior Member
Joined: Jan 2008
Posts: 1,460
From: Wherever my job takes me
Default RE: Trouble Cold Starting

What year and size motor you got
 
  #8  
Old 02-08-2008 | 10:27 PM
uscghalle's Avatar
Thread Starter
|
Member
Joined: Oct 2007
Posts: 64
From:
Default RE: Trouble Cold Starting

97 Z71 5.7L
 
  #9  
Old 02-08-2008 | 10:41 PM
rxsteven's Avatar
Senior Member
Joined: Jan 2008
Posts: 1,460
From: Wherever my job takes me
Default RE: Trouble Cold Starting

Are you getting any codes?
 
  #10  
Old 02-08-2008 | 10:46 PM
uscghalle's Avatar
Thread Starter
|
Member
Joined: Oct 2007
Posts: 64
From:
Default RE: Trouble Cold Starting

Do you mean like check engine lights or anything like that? If so, no, no check anything lights.
 


Quick Reply: Trouble Cold Starting



All times are GMT -5. The time now is 01:37 AM.